entrance storefront and curtain wall systems
Available Products Below...

Curtain Wall Systems

TMW 450
TMW 450 is the ideal selection when designing thermally improved low rise and mid rise curtainwall applications. This versatile system offers glazing from either the exterior or the interior. This economical yet performance driven system utilizes labor saving screw spline construction for economical fabrication and installation.

  • Complete 2" x 6-13/16" system incorporates a multitude of features including corner posts and expansion mullions.
  • Door framing sections are available for incorporation into wall system.
  • System is designed primarily for 1” insulated infill, but can easily be adapted for 3/16" to 1-1/16" infills.
  • Vertical retainer is extruded as an integral part of vertical mullion, which provides greater structural values while maintaining a trim 2" profile.
  • Freedom in design allows for alternative glazing caps including radius or projected rectangular designs.
  • Built in vertical retainer reduces labor cost and does not require pressure plates, screws and thermal spacers.
  • Utilizing snap on exterior caps allows for different exterior and interior finishes, and creates unlimited design possibilities with associated cost savings.
  • Available in standard and custom anodized finishes and painted applications.
  • Meets all AAMA air, water, and structural requirements.
 

TMW 450 EFG
TMW 450 EFG offers versatile features and aesthetics of two (2) sided vertical butt glazing and is primarily offered for low and mid rise applications. This easy to install and affordable system features labor cost saving screw spline construction for economical fabrication. Two (2) sided vertical structural glazing makes a visual impact and creates an apparent unbroken expanse of glass. TMW 450 EFG is an ideal selection when designing office buildings, corporate centers, and contemporary architectural applications.

  • Complete 2" x 6-13/16" system incorporates a multitude of features including corner posts and expansion mullions.
  • System is thermally broken and is designed primarily for 1" insulated infil.
  • Door framing sections are available for incorporation into wall system.
  • Exterior perimeter snap-on covers allow for different exterior and interior finishes and create unlimited design possibilities and associated cost savings.
  • Freedom in design allows for alternative horizontal glazing caps including radius or projected horizontal designs.
  • Available in standard or custom anodized finishes and painted applications.
  • Meets all AAMA air, water and structural requirements.
 

TMW 453
TMW 453 is the ideal selection when designing thermally improved low rise and mid rise curtainwall applications. This versatile system offers glazing from either the exterior or the interior. This economical yet performance driven system utilizes labor saving screw spline construction for economical fabrication and installation.

  • Complete 2" x 6-13/16" system incorporates a multitude of features including corner posts and expansion mullions.
  • Door framing sections are available for incorporation into wall system.
  • System is designed primarily for 1” insulated infill, but can easily be adapted for 3/16" to 1-1/16" infills.
  • Vertical retainer is extruded as an integral part of vertical mullion, which provides greater structural values while maintaining a trim 2" profile.
  • Freedom in design allows for alternative glazing caps including radius or projected rectangular designs.
  • Built in vertical retainer reduces labor cost and does not require pressure plates, screws and thermal spacers.
  • Utilizing snap on exterior caps allows for different exterior and interior finishes, and creates unlimited design possibilities with associated cost savings.
  • Available in standard and custom anodized finishes and painted applications.
  • Meets all AAMA air, water, and structural requirements.

 

TMW 453 EFG
TMW 453 EFG vertically butt glazed curtainwall is an ideal selection for thermally improved low rise, mid rise and high rise curtainwall applications. Combining the bold 2-1/2" back members and horizontal faces along with the added aesthetics of two (2) sided vertical structural glazing makes for a visual impact for almost any type of application. Vertical butt glazing creates apparently unbroken expanses of glass.

  • Complete 2-1/2" x 6-13/16" system incorporates a multitude of features including corner posts and expansion mullions.
  • Labor saving screw spline construction allows for economical fabrication and installation.
  • Door framing sections are available for incorporation into wall system.
  • Exterior perimeter snap-on covers allow for different exterior and interior finishes and creates unlimited design possibilities and associated cost savings.
  • Freedom in design allows for alternative horizontal glazing caps including radius or projected designs.
  • Available in standard or custom anodized finishes and painted applications.
  • Meets all AAMA air, water and structural requirements.

 

70 Wall
70 Wall, a 2-1/2" wide profile curtain wall system with a wide variety of depths gives designers excellent flexibility in today's difficult and complex project requirements. This time tested system for low and high rise applications offers water-light, rugged and versatile features, which include thermally improved design.

This engineered framing system is primarily designed for curtain wall applications but is also used for storefront conditions where high structural values are required,

  • A broad array of tubular back members, offer system depths from 5-11/16" to 10-11/16".
  • Split design is also available with optional face designs. This screw spline module design construction offers fast, labor saving assembly and installation.
  • A full choice of face reveals including radius and projected rectangular designs.
  • Excellent wind load capabilities for free span applications.
  • This exterior glazed pressure plate system allows for different exterior and interior finishes, and creates unlimited design possibilities with associated cost savings.
  • Door framing sections are available for incorporation into wall system.
  • Available in standard and custom anodized finishes and painted applications.
  • Meets all AAMA air, water and structural requirements.

 

EFG 800
Built on time proven performance, the EFG 800 offers versatile features with the added aesthetics of two(2) sided structural silicone glazing. This engineered system provides flexibility in design for both low and high-rise curtain-wall application. EFG800 is an excellent choice when high thermal performance along with greater structural strength is required.

This engineered framing system is primarily designed for curtain wall applications but is also used for storefront conditions where high structural values are required.

  • Two(2) sided structural glazing and freedom of design.
  • Available in both tubular and split mullion design allows for fast, labor savings assembly and installation.
  • A broad array of members allows for system depths from 5-15/16" to 10-15/16".
  • Excellent wind load capabilities for free span applications.
  • A full choice of face reveals including radius and rectangular designs.
  • This exterior glazed pressure plate system allows for different exterior and interior finishes, and creates unlimited design possibilities with associated cost savings.
  • Door framing sections are available for incorporation into wall system.
    Available in standard and custom anodized finishes and painted applications.
  • Meets all AMMA air, water and structural requirements.
Top | Home    
PITTCO ARCHITECTURAL METALS INC
1530 Landmeier Road   Elk Grove Village   Illinois   60007    800 992 7488 / 847 593 3131   fax 847 593 9946
info@pittcometals.com