70 Wall®

70 Wall®

70 Wall®, a custom manufactured 2-1/2" wide profile curtain wall system with a wide variety of depths gives designers excellent flexibility in today's difficult and complex project requirements. This time-tested system for low and high rise applications offers water-light, rugged and versatile features, which include thermally broken design.

This custom engineered framing system is primarily designed for curtain wall applications but is also used for storefront conditions where high structural values are required,

  • Custom Manufactured
  • Fully Captured, Two(2) sided, and Four(4) sided structural glazing allow freedom of design.
  • Available in both tubular and split mullion design allows for fast, labor savings assembly and installation.
  • A broad array of members allows for system depths from 5-15/16" to 10-15/16".
  • Excellent wind load capabilities for free span applications.
  • A full choice of face reveals including radius and rectangular designs.
  • This exterior glazed pressure plate system allows for different exterior and interior finishes and creates unlimited design possibilities with associated cost savings.
  • Door framing sections are available for incorporation into the wall system.
    Available in standard and custom anodized finishes and painted applications.
  • Meets all AAMA air, water, and structural requirements.
70 Wall® SM

70 Wall® SM

70 Wall® SM is a 2-1/2" wide x 5 11/16", 6 11/16" or 7 11/16" deep screw spline curtain wall system for low and high rise applications offers water-light, rugged and versatile features, which include thermally broken design.

This engineered framing system is primarily designed for curtain wall applications but is also used for storefront conditions where high structural values are required.

  • This screw-spline module design construction offers fast, labor saving assembly and installation.
  • A full choice of face reveals including radius and projected rectangular designs
  • This exterior glazed pressure plate system allows for different exteriorand interior finishes, and creates unlimited design possibilities with associated cost savings.
  • Door framing sections are available for incorporation into wall system.
  • Available in standard and custom anodized finishes and painted applications.
  • Meets all AAMA air, water and structural requirements.
70 Wall Carrier

70 Wall Carrier

70 Wall® Carrier System

Our 71S Carrier is a 4-sided structurally glazed system that is shop glazed with structural silicone.  The shop glazing is performed in a clean and temperature-controlled environment which ensures that the structural glazing is performed to high standards.  Pre-glazing the Carrier frames also decreases the field time to enclose the building and complete the work.  The carrier frames are then applied to our 70 Wall®.

Overall dimensions of the SSG system range from 6 3/16” to 11 3/16”, depending on back member depth using 1” glazing.  There is an option to include a large assortment of exterior face caps, further extending the design flexibility of the system.

70 Wall® XT

70 Wall® XT

70 Wall® XT is a 2-1/2" wide profile high thermal performance curtain wall system with a wide variety of depths which gives designers excellent flexibility in today's difficult and complex project requirements. 

This engineered framing system is primarily designed for curtain wall applications but is also used for storefront conditions where high structural and thermal values are required,

 

· Outside glazed, inside glazed, and vertical butt glazed curtain wall 
· High thermal performance to meet energy codes 
· Standard bottom drainage or zone dam drainage optional 
· 70 Wall® XT has a 2 1/2" sight line 
· Available in 6", 7", 8" and 11" O.A. system depths 
· Infill options from standard 1/4" up to 1 5/16", 1 1/2" to 2" special framing 
· Shear block or screw spline assembly 
· Concealed fastener joinery gives a smooth appearance 
· Entrance sub-framing system available 
· Available in anodized and standard or custom painted finishes 
· Interior and exterior can be different colors 
· Numerous exterior face contours available

TMW® 450

TMW® 450

TMW® 450 is the ideal selection when designing thermally improved low rise and mid-rise curtainwall applications. This versatile system offers glazing from either the exterior or the interior. This custom manufactured economical yet performance driven system utilizes labor saving screw spline construction for economical fabrication and installation.

  • Complete 2" x 6-3/4" system incorporates a multitude of features including corner posts and expansion mullions.
  • Door framing sections are available for incorporation into wall system.
  • System is designed primarily for 1" insulated infill, but can easily be adapted for 3/16" to 1-1/16" infills.
  • Vertical retainer is extruded as an integral part of vertical mullion, which provides greater structural values while maintaining a trim 2" profile.
  • Freedom in design allows for alternative glazing caps including radius or projected rectangular designs.
  • Built-in vertical retainer reduces labor cost and does not require pressure plates, screws and thermal spacers.
  • Utilizing snap-on exterior caps allows for different exterior and interior finishes, and creates unlimited design possibilities with associated cost savings.
  • Available in standard and custom anodized finishes and painted applications.
  • Meets all AAMA air, water, and structural requirements.
TMW® 453

TMW® 453

TMW® 453 is the ideal selection when designing thermally, improved low rise, mid rise, and high rise curtainwall applications, this bold 2-1/2" wide profile system is an excellent choice when designing office buildings, corporate centers, and institutional projects. Custom Manufactured system is designed primarily for 1" insulated infills and can be glazed from either the interior or exterior. This versatile and reliable system provides a visual impact for almost any type of application.

  • Complete 2-1/2" x 6-3/4" system incorporates a multitude of features including corner posts and expansion mullions.
  • Vertical retainer is extruded as an integral part of vertical mullion, which provides greater structural values when designing free span applications.
  • Labor saving screw spine construction allows for economical fabrication and installation.
  • Door framing sections are available for incorporation into wall system.
  • System is designed primarily for 1" insulated infill, but can easily be adapted for 3/16" to 11/16" infills.
  • Freedom in design allows for alternative glazing caps including radius or projected rectangular designs.
  • Built-in vertical retainer reduces labor costs and does not require pressure plates, screws and thermal spacers.
  • Utilizes snap-on exterior caps to allow for different exterior and interior finishes, and creates unlimited design possibilities with associated cost savings.
  • Available in standard and custom anodized finishes and painted applications.
  • Meets all AAMA air, water, and structural requirements.